DusQ1 CPG 500 is a controlled pore glass (CPG) solid support with a 500 Å pore size, modified with the non-fluorescent DusQ1 dark quencher. It supports the synthesis of oligonucleotides up to 50 bases long that carry DusQ1 at the 3′ end. DusQ1 absorbs most strongly between 480 and 580 nm, with an absorption maximum at 534 nm. As a result, it suits the preparation of hybridization probes such as TaqMan, Molecular Beacon, and Scorpion probes.
Key Features and Benefits
- 3′-DusQ1 Modification: The support introduces the DusQ1 quencher directly at the oligonucleotide 3′ end during synthesis.
- 500 Å Pore Size: This pore size suits the synthesis of oligonucleotides up to 50 bases in length.
- Non-Fluorescent Dark Quencher: DusQ1 does not fluoresce, so it does not add emission of its own to the probe signal.
- Defined Absorption Range: DusQ1 absorbs most strongly from 480 to 580 nm, with its maximum at 534 nm.
- Combined Quenching: In addition, DusQ1 can quench through a combination of static and dynamic mechanisms.
- Broad Fluorophore Compatibility: For example, DusQ1 can quench EDANS, FAM, TET, HEX, JOE, R6G, and many other fluorophores.
Applications
- TaqMan Probe Synthesis: The support provides the 3′ quencher for dual-labeled TaqMan hydrolysis probes.
- Molecular Beacon Synthesis: Similarly, it supplies the 3′-DusQ1 quencher for stem-loop Molecular Beacon probes.
- Scorpion Probe Synthesis: Researchers can also build Scorpion probes that require a 3′ dark quencher.
- 3′-Quenched Oligonucleotides: Solid-phase synthesis on this CPG yields custom oligonucleotides with a 3′ DusQ1 label.
- Nucleic Acid Detection Assays: Dark quencher-labeled oligonucleotides are widely used in fluorescence-based nucleic acid detection.
Storage and Handling
- Storage: Store according to supplier specifications in a tightly sealed container, protected from moisture and light.
- Handling: Allow the container to reach room temperature before opening, and avoid grinding or crushing the glass beads.
- Preparation: Weigh and pack the support into synthesis columns suited to your synthesizer and synthesis scale.
- Synthesis and Analysis: Follow supplier guidance for cleavage and deprotection, then analyze products by HPLC or mass spectrometry.
DusQ1 CPG 500 combines a 500 Å controlled pore glass support with a 3′-DusQ1 dark quencher. Its 480–580 nm absorption range allows pairing with fluorophores such as FAM, HEX, and TET. Therefore, researchers can prepare TaqMan, Molecular Beacon, and Scorpion probes up to 50 bases long.
AxisPharm offers 5000+ PEG Linkers with high purity. Different kinds of PEG Reagents may be available by custom synthesis.